Technology

Colour with depth

A water-based multicolour decorative coating with very fine granules. It gives a refined, even texture that sits calmly in a contemporary interior.

A wall with the Dvatone coating and a phyto-picture: leaf shadows on the coated wall

01Up close

From the wall to the granule

One coating, DV 033 Honey Cork, from three distances: a calm surface from afar, granules up close.

A wall with the DV 033 Honey Cork coating
The DV 033 Honey Cork texture, closer
The DV 033 Honey Cork granules up close
DV 033 Honey Cork
  1. 01

    Wall

    From a step away the coating reads as one deep colour.

  2. 02

    Texture

    Closer in, the grain appears: fine, even, never blotchy.

  3. 03

    Granules

    Granules of several colours lie side by side and never blend.

Coating properties

below30g/⁠l

Low VOC

Volatile organic compounds: below 30 g/⁠l.

from200ml/⁠m²

Consumption

Base consumption from 200 ml/⁠m². We will work out the volume for your area on request.

from2L

Made to order

From 2 L in 1 L steps: you order exactly as much as you need.

  • Water-based

  • Wear resistance

  • Eco-⁠friendly

  • Breathable

  • Optical stability

  • Odour-free

  • Seamless local repair

  • Fine granules

  • Smooth surface

  • No removal needed to repaint

Technical data sheets (TDS) and application guidelines are available in the Dvatone Telegram bot.

Open in Telegram

02The coating system

5-6 layers, one surface

Primer, two coats of base paint and two to three coats of decorative coating on a prepared surface. A protective varnish is optional.

  1. Prepared surface

    DSTU-⁠N B V.2.6-212:2016, Q3-⁠Q4

  2. DVATONE Primer

    rollerspray1 coat ~ 10 m²/l

  3. DVATONE Water-Based Paint

    rollerspray2 coats ~ 6-8 m²/l

  4. The finish layer: a scan of the DV 004 Desert Silence coating

    DVATONE Decorative Coating

    spray2-3 coats ~ 3-5 m²/l

  5. Protective varnish

    optional

Note: surface preparation per DSTU-⁠N B V.2.6-212:2016 (Q3-⁠Q4). The layer thicknesses in the drawing are not to scale; a Dvatone consultant confirms the build-⁠up and the quantities for your project.

Application

  • +15…+25 °C
  • Humidity up to 60 %
  • No draughts
Equipment
Nozzle 2.5 mm
Pressure
1.5-2.5 bar
Mixing
By hand only. Do not use a mixer.
Between coats
4-6 hours (+20 °C)
Fully dry
24 hours
Ready for use
21 days before the first wash

The technical data sheet in the Telegram bot

DVATONE colour collection

The whole catalogue

03About Dvatone

Colour is a feeling, not a code

Dvatone creates coatings that come alive in a space: instead of a flat shade, we show living light, a multifaceted texture and the depth of your interior.

We are based in Kyiv. We make the coating in the volume you need, from 2 L.

  • For homeowners

    A confident choice of coating that you will enjoy for years.

  • For designers and architects

    A precise tool for choosing a coating for a project and presenting it to a client.

04How it works

How to get the multicolour effect on the wall

The colours are not applied one at a time: the multicolour texture forms as the paint is sprayed on.

  1. Preparing the wall before painting

    Preparing the wall

    The wall is prepared for application. The substrate and preparation requirements are in the technical data sheets (TDS) in the Dvatone Telegram bot.

  2. Spraying the multicolour paint

    Spray application

    The paint is sprayed on with a compressor. The best results come from Rigo professional compressors (Italy) with a 2.5 mm nozzle.

  3. The finished wall in the same green multicolour coating, after the protective film came off

    Dvatone on the wall

    Granules of several colours open up on the base tone and form a strong three-dimensional structure.

Stills 01-03 from the Dvatone application film: one composition from the base coat to the finished wall.

European quality

Base
Dialcolor
Made by
Trimetal
Group
AkzoNobel

See the texture for yourself

Order a Designer Box to judge the shade and texture by hand, in the light of the space.